Bandolero Engine Seals
Attention: All INEX Inspectors (with Bandolero Cars)
As of 10/19/20, The US Legends Engine Shop is now sealing the Bandolero engine in a different way than previously done.
They are still using the same seals in some different locations.
- The cylinder head seals will be installed on the opposite side of the cylinder head, connecting them to the intake under the shroud / cover.
- There will now be two seals on the shroud / cover.
- The side cover seal will remain as previously done.
This method of sealing the Bandolero engine was started on engine # BO 2838.
FAN SIDE BACK SIDE SIDE COVER FRONT SIDE
Scott Reinhardt (INEX General Manager)