|07/12/19||Rulebook Clarification: FZ09 Stock Components|
|06/28/19||TECH TIP: LEGEND CAR TRAILING ARM MOUNTING - Rule Clarification|
|08/20/18||Rulebook Update: CAR LUG NUTS & JAM NUTS|
|05/09/18||2018 BOJSSO TECH NOTES|
|02/27/18||2018 INEX Legend Car Dash Rule|
|12/18/17||Legend Car Hood Mounting|
Legend Car Hood Mounting
Legend Car hoods must be mounted "as delivered by US Legend Cars International".
(with the exception of using hood pins on the rear mounting points)
The measurements for the length of the hoods are as follows:
- 37 Ford or Chevy hood = 32" minimum (measured down the middle of the hood).
- 34 Ford or Chevy hood = 26" minimum (measured down the middle of the hood).
- The front of the 37 Chevy hood should be within 1/2" of edge to edge with the top of the grill.
- The back of all Legend Car hoods should line up with the body line on the cowl of the body
(when looking down on the hood, the back of the hood should not overlap this bodyline).